Cadillac escalade 2002 User Manual
1-5
In addition, you can also store the seat exit position for
driver 1 and driver 2. See “Memory Seat Exit” later in this
section for more information.
driver 1 and driver 2. See “Memory Seat Exit” later in this
section for more information.
The memory function does not store the lumbar or the
side wing positions.
side wing positions.
To store your memory seat and mirror positions,
do the following:
1. Adjust the driver’s seat and both outside mirrors to
do the following:
1. Adjust the driver’s seat and both outside mirrors to
your desired position.
2. Press and hold the 1 or 2 (driver 1 or 2) button of
the memory control for three seconds. When you
hear a chime ring two times, the memory positions
are stored.
hear a chime ring two times, the memory positions
are stored.
To do the same thing for a second driver, follow the
preceding steps, but press the other number of the
memory control. The memory recall feature only works
when the transmission is in PARK (P).
preceding steps, but press the other number of the
memory control. The memory recall feature only works
when the transmission is in PARK (P).
To recall memory seat and mirror positions, make sure
your vehicle is in PARK (P), then press the 1 or 2 button
of the memory control to recall the seat setting. You will
hear a chime ring one time to let you know the setting
has been selected.
your vehicle is in PARK (P), then press the 1 or 2 button
of the memory control to recall the seat setting. You will
hear a chime ring one time to let you know the setting
has been selected.
The memory seat and mirror positions can also be
programmed to work with the keyless entry system.
See “Secondary Information Center” in the Index for
more information.
programmed to work with the keyless entry system.
See “Secondary Information Center” in the Index for
more information.
Memory Seat Exit
For this function to work, it must be enabled in the
secondary information center. See “Secondary
Information Center” in the Index for more information.
secondary information center. See “Secondary
Information Center” in the Index for more information.
By moving the seats to a stored exit position, the
memory seat exit feature can make it easier to leave the
vehicle. To store the seat exit position for driver 1 or
driver 2, do the following:
memory seat exit feature can make it easier to leave the
vehicle. To store the seat exit position for driver 1 or
driver 2, do the following:
1. Select the desired driver number by pressing
the 1 or 2 button.
2. Move the seat to the desired position.
3. Press and hold the Exit button of the memory
control for three seconds. When you hear a chime
ring two times, the exit position is stored for the
identified driver (driver 1 or 2).
ring two times, the exit position is stored for the
identified driver (driver 1 or 2).
To use the exit feature, press the Exit button on the
memory seat controls. If you have the exit feature
enabled in the secondary information center, then
removing the key from the ignition will cause the seat to
move to the preset exit position without having to press
the Exit button. See “Secondary Information Center” in
the Index for more information.
memory seat controls. If you have the exit feature
enabled in the secondary information center, then
removing the key from the ignition will cause the seat to
move to the preset exit position without having to press
the Exit button. See “Secondary Information Center” in
the Index for more information.