Cadillac escalade 2002 User Manual

The knob on the left side of the electronic climate control
panel is used to regulate the fan speed. To manually
increase airflow, move the knob clockwise. To manually
decrease airflow, move it counterclockwise.

OFF: If the knob is in OFF, outside air will still enter
the vehicle, and will be directed based on the position of
the mode knob.

AUTO: If the knob is in AUTO, the fan speed will vary
as the system maintains the selected temperature.

When both the fan knob and mode knob are in the AUTO
position, the system will then automatically maintain the
desired cabin temperature as selected by the temperature
knob. Manual operation is also available.

The middle knob on the control panel is used to select
the desired air temperature in your vehicle. This knob
will allow you to adjust the interior air temperature
independent of the mode knob setting. Move the knob
clockwise toward 82 for warmer air. Move the knob
counterclockwise toward 66 for cooler air. When the
system is set for automatic operation, sensors will
control the fan speed.

Full Hot: If you turn the temperature knob past 82, the
system will go into the “full hot” mode. The system will
remain at that maximum heating setting and the fan will
blow at the speed to which the fan knob is set. If the fan
is in AUTO, it will run at full speed.

Full Cold: If you turn the temperature knob past 66, the
system will go into the “full cold” mode. The system
will remain at that maximum cooling setting and the fan
will blow at the speed to which the fan knob is set. If the
fan is in AUTO, it will run at full speed.