Cadillac escalade 2002 User Manual

1. Find the anchors for the seating position you want

to use, where the bottom of the seatback meets the
back of the seat cushion.

2. Put the child restraint on the seat.

3. Attach the anchor points on the child restraint to

the anchors in the vehicle. The child restraint
instructions will show you how.

4. If the child restraint is forward

-

facing, attach the

top strap to the top strap anchor. See “Top Strap”
in the Index. Tighten the top strap according to the
child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.

You’ll be using the lap

-

shoulder belt. See the earlier 

part about the top strap if the child restraint has one. 
Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.

1. Put the restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.

If the shoulder belt goes in front of the child’s face or
neck, put it behind the child restraint.