Cadillac escalade 2000 User Manual
2-42
Multifunction Lever
The lever on the left side of the steering column
includes your:
D Turn and Lane Change Signals
D Headlamp High/Low
includes your:
D Turn and Lane Change Signals
D Headlamp High/Low
-
Beam Changer
D Windshield Wipers
D Windshield Washer
D Cruise Control
D Windshield Washer
D Cruise Control
Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
When the turn is finished, the lever will return automatically.
An arrow located on the
instrument panel will flash
in the direction of the turn
or lane change.
instrument panel will flash
in the direction of the turn
or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
If you move the lever all the way up or down and the arrow
flashes at twice the normal rate, a signal bulb may be burned
out and other drivers may not see your turn signal.
flashes at twice the normal rate, a signal bulb may be burned
out and other drivers may not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned
accident. If the arrows don’t go on at all when you
signal a turn, check for burned
-
out bulbs and a blown
fuse (see “Fuses” in the Index).