Chevrolet camaro 2001 User Manual

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down. 
When the turn is finished, the lever will return automatically.

An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

As you signal a turn or a lane change, if the arrows don’t
flash but just stay on as you signal a turn or lane change,
a signal bulb may be burned out and other drivers won’t
see your turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check the fuse (see “Fuses and Circuit
Breakers” in the Index).

When the high beams are
on, this light located on the
instrument panel cluster
also will be on.

To change the headlamps from low beam to high or high
beam to low, pull the turn signal lever all the way
toward you. Then release it.