GPX X642 User Manual

Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or 
crease the print media. Straighten the edges on a level surface.

Note: Hold transparencies by the edges, and avoid touching the print side. Fan the stack 

of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on 
the transparencies.

Load the media in the tray.

Use the stack height label as a guide for stack height when loading print media.

Note: Letterhead or other preprinted paper must be loaded differently depending on the 

options you have installed.

Load paper or transparencies with the left edge of the stack against the stack height label 
and with the recommended print side facing up.

Load envelopes flap side down with the stamp area and flap on the left. The end of the 
envelope with the stamp area enters the multipurpose feeder first.

Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the MFP.

Note: Load only one size and type of print media at a time in the multipurpose feeder. Do 

not mix sizes and types in the same tray.

Follow the illustrations for loading the paper according to your options.