Lumiscope 1134 User Manual

Installing the Batteries

1. To insert the batteries

A. Press down on the latch and lift the cover towards you

to open the battery compartment.

B. Insert 4 "AA" batteries as indicated. Make sure to match

polarities (+, –) on the batteries.

C. Replace the battery cover by inserting the two hooks at

the bottom into the slot, then push on the top area.

2. To Connect the AC/DC Adapter

A. Plug the AC/DC adapter (6V 500mA), into the jack

located at the bottom of this

unit. (shown in the diagram).

B. Use only the adapter

included with this unit.

1. Place your elbow on a table

so that the cuff is at the same

level as your heart. (Fig. A.)

Note: The level of your heart is

slightly below your armpit.

Relax your entire body,

especially the area between

your elbow and fingers.

2. If the cuff is not at the same

level as your heart or if

you can not keep your arm

completely still throughout the

reading, use a soft object such

as a folded towel to support

your arm. (Fig. B) Do not

allow hard objects to come in

contact with the wrist cuff.

3. Turn your palm upwards.

4. Sit upright in a chair, and take

5-6 deep breaths.

Avoid leaning back or

crossing your legs while the

measurement is being taken.

(Fig. C)

Fig. B

Correct Measuring Posture

Fig. C

(

)

Fig. A

Note:

Please remove

batteries when not in
use for an extended
period of time. Do not
dispose batteries with
household garbage.

Note:

Remove batteries

when using the AC
adapter for an extended
period of time.