OKI MICROLINE 8810N User Manual

8. Observe the black pin (1) over which the ribbon 

knob fits, and the guides (2)—one at either end—

into which the ribbon arms fit. 

9. Feed the ribbon arms (1) in beside the guides 

(2), position the take-up knob (3) over the pin, 

then  press the cartridge in firmly at either end. 

10. Pull the ribbon out a bit at the left end of the 

cartridge to give some slack, then slide the ribbon 

underneath the printhead. Be careful that the 

ribbon is not twisted, folded or pulled off the 

ribbon arms during this process.  

11. Make sure the ribbon is threaded through the 

indentation in each ribbon guide arm. 

Always turn the ribbon knob clockwise: 

turning it counterclockwise (to the left) can 

12. Turn the ribbon knob clockwise (in the direction 

of the molded arrow) to take up any excess slack 

in the ribbon. 

F2_07b.jpg

  

F2_11a.jpg

  

F2_13a.jpg

  

F2_1

3b.jp

g

F2_15a.j

pg