Quantum 560uf-l User Manual
WARNING - AUSTRALIAN USERS
This FAX/Modem has been tested with Bitcom, Bitware for windows
and fully complies with AUSTEL Technical Standards if the following
conditions are followed :
and fully complies with AUSTEL Technical Standards if the following
conditions are followed :
1
THE NUNMBER OF RE-DIAL MUST NOT BE SET TO
GREATER THAN 3
2. THE MODEM MUST NOT BE CONFIGURED TO THE BELL
2. THE MODEM MUST NOT BE CONFIGURED TO THE BELL
MODE OF OPERATION
Software packages other than the above, or any other configurations
defined by the user, were not tested and may result in the modem
being operated in a non-compliant manner.
defined by the user, were not tested and may result in the modem
being operated in a non-compliant manner.
CONSEQUENTLY, THERE WOULD BE NO PERMIT IN FORCE
FOR THIS EQUIPMENT, AND THE TELECOMMUNICATIONS
ACT 1991 PRESCRIBES A PENALTY OF $12,000 FOR
CONNECTION OF NON-PERMITTED EQUIPMENT.
FOR THIS EQUIPMENT, AND THE TELECOMMUNICATIONS
ACT 1991 PRESCRIBES A PENALTY OF $12,000 FOR
CONNECTION OF NON-PERMITTED EQUIPMENT.
For external modem, users must only use an ACTIVE AC Adaptor,
Model
No . : 4824-1485-3AC. (Approval No. : N12430)
Model
No . : 4824-1485-3AC. (Approval No. : N12430)
WARNING - SWEDISH USERS
After the country code or the digit 0 from a PBX, users must
use a W to indicate dial tone detection. It is not allowed to use
pause (comma) instead of dial tone detection (W).
use a W to indicate dial tone detection. It is not allowed to use
pause (comma) instead of dial tone detection (W).