ZyXEL Communications NWA-1100 User Manual
Chapter 14 Maintenance
ZyXEL NWA-1100 User’s Guide
124
1
Do not turn off the ZyXEL Device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyXEL Device again.
the ZyXEL Device again.
Figure 64 Firmware Upload In Process
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 65 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Figure 66 Firmware Upload Error
14.7 Configuration Screen
Use this screen to backup, restore and reset the configuration of your ZyXEL Device.
Click Maintenance > Configuration. The screen appears as shown next.
Click Maintenance > Configuration. The screen appears as shown next.