GE PT878GC User Manual
Programming Site Data
4-31
April 2004
Entering Skan/Measure Count Parameters (cont.)
3. The next prompt asks for the percentage of Noise Level.
a. Press
[ENTER]
to enter the text box.
b. Use the numeric keys to enter the recommended value.
c. Press
[ENTER]
to confirm the entry.
4. If you wish to select (or deselect) Measure Times only
(instead of both Skan and Measure times), press
[ENTER]
at
the Measure Only prompt.
5. If you wish to select (or deselect) a SNR (signal-to-noise
ratio) test, press the [X] key to highlight the SNR Test prompt
and press
and press
[ENTER]
.
a. If you have selected SNR Test, the next prompt asks for
the Minimum Noise Level. Press
[ENTER]
, type in the
recommended value, and press
[ENTER]
to confirm the
entry.
b. The final prompt asks for the Low SNR Error Limit. (The
default is 7.) Press
[ENTER]
, type in the recommended
value, and press
[ENTER]
to confirm the entry.
Pressing the [T] key returns the meter to the Cycle Number
entry, and pressing the [
entry, and pressing the [
S
] key returns the meter to the Count
tab.
•
To confirm the entries and return to Operate mode, press
[F3]
(OK).
•
To leave the window without confirming the entries and return
to Operate mode, press
to Operate mode, press
[F2]
(Cancel) or the
[ESC]
key.