Garmin gpsmap 3006c, 3010c User Manual

a

PPendIX

 > 

n

avIgatIon

 t

erMs

Sunset—the time at which the sun sets on this day.
time Of Day—the current time.
time to—the estimated time required to reach a Go To destination or the next 

waypoint in a route. Also known as “estimated time en route” (ETE).
time to Dest—the estimated time required to reach a Go To destination or the 

final waypoint in a route.
time to Next—the estimated time required to reach a Go To destination or the 

next waypoint in a route.
to Course—the recommended direction to steer to reduce course error or stay on 

course. Provides the most efficient heading to get back to the course and proceed 

along your route.
track—the direction of movement relative to the ground. Also known as “ground 

track.”
trip Odometer—a running tally of distance traveled since the last reset. See also 

“Odometer.”
total Average Speed—the average speed of the unit for both moving and 

stopped speeds since the last timer reset.
total trip timer—total time the unit has been in operation since the last reset of 

the trip timers.
turn—the angle difference between the bearing to your destination and your 

current track. l indicates you should turn left; R indicates you should turn right. 

VMG (Velocity Made Good)—the speed with which you are closing in on 

a destination along a course. Also referred to as the vector velocity to your 

destination.
Voltage—the current voltage reading being received by unit.
Water Speed—the speed through the water. This field is active only if the 

GPSMAP 3006C/3010C is receiving speed readings from a NMEA device or a 

Garmin Sounder Module.
Water temp—the water temperature. This field is active only if the  

GPSMAP 3006C/3010C is receiving temp readings from a NMEA device or a 

Garmin Sounder Module.
Waypoint Destination—the final waypoint in the route or the destination 

waypoint.
Waypoint Next—the next waypoint in the route.