ZyXEL Communications P-660RU-T V2 User Manual

Chapter 2 Introducing the Web Configurator

P-660RU-T v2 User’s Guide

Figure 5    Web Configurator: Site Map Screen 

Click the 

 icon (located in the top right corner of most screens) to view embedded help. 

The following table describes the labels in this screen. 

Table 3   Web Configurator Screens Summary

Wizard Setup

Connection 

Setup

Use these screens for initial configuration including ISP 

parameters for Internet Access and WAN IP / DHCP server 

address assignment.

Advanced Setup

Password

Use this screen to change your password.

LAN

Use this screen to configure LAN DHCP and TCP/IP settings.

WAN

WAN Setup

Use this screen to change the ZyXEL Device’s WAN remote 

node settings.

WAN Backup

Use this screen to configure your traffic redirect properties and 

WAN backup settings.

NAT

SUA Only

Use this screen to configure servers behind the ZyXEL Device.

Full Feature

Use this screen to configure network address translation 

mapping rules.

Security

Use this screen to configure Internet security and apply the 

predefined filter rules.

Dynamic DNS

Use this screen to set up dynamic DNS.

Time and Date

Use this screen to change your ZyXEL Device’s time and date.

Remote 

Management

Use this screen to configure through which interface(s) and from 

which IP address(es) users can use Telnet/FTP/Web to manage 

the ZyXEL Device.

UPnP

Use this screen to enable UPnP on the ZyXEL Device.

Maintenance

System Status

This screen contains administrative and system-related 

information and is read-only.

DHCP Table

This screen displays DHCP (Dynamic Host Configuration 

Protocol) related information and is read-only.