Kenwood HM-DV6MD User Manual
System connection
10
Preparation section
Channel space setting
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be
used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-
tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with
your area by referring to the following table.
However, if the current channel space setting does not match the setting in the area where the system is to be
used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-
tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with
your area by referring to the following table.
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
1
Select the "TUNER" input.
2
Press the STOP
7/TUNING MODE key.
(for more than 5 seconds)
Each press switches the space frequency alter-
nately.
1 FM 50 kHz, AM 9 kHz
2 FM 100 kHz, AM 10 kHz
Main unit only
STOP
7
TUNING MODE
TUNER/
BAND