Hitachi cml155xw User Manual
17
01-2)E2 CML155XW (5030032708B) • 2002/11/5•• 01:14
E
N
GLIS
H
4. Plug the analog (or digital) video signal cable into the Analog (or Digital) Video Input
port on the back of the display (“ANALOG IN” (or “DIGITAL IN”) as shown above).
5. Connect the other end of the video cable into your computer’s video port. (Please check
your computer’s documentation if you’re not sure where the port is located.)
6. Connect the audio-mic cable (green) from “AUDIO1” port of the display to the line-out
port of your PC and connect other wire (red) from “MIC” port of the display to the line-in
port of your PC.
port of your PC.
Note: For best display performance, it is strongly recommended that you use Auto
Setup to automatically configure your display’s settings (only for Analog
input).
input).
J35
J35