Hitachi 42pd7500a User Manual
54
OTHER FUNCTIONS (continued)
DVD Player/STB Selection (continued)
Set up hint
Example) HITACHI DVD
To operate HITACHI DVD player, press and hold the
button,
followed by the
button.
1. Set up the maker.
Press
button to indicate the DVD LED on the remote
control.
Whilst the DVD LED is flashing, press
Whilst the DVD LED is flashing, press
and
.
2. Set up the maker type.
Release the
button whilst keeping
button depressed.
Then, press the
button.
3. Confirm the setting.
After setting the maker and type, press the POWER button
on the remote control. If the DVD does not switch on, repeat
step 1 and 2 using other maker types as listed in the chart
on .
on the remote control. If the DVD does not switch on, repeat
step 1 and 2 using other maker types as listed in the chart
on .
NOTE
• Not all models of the listed makers can be operated using
this remote control.
Signal Check (RGB mode)
Changes in the signal status are displayed on the screen as they arise.
Status
Display
Action
When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.
the input signal is switched or
when the RECALL button is
pressed.
A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
terminal and the horizontal and
vertical sync frequency.
When the sync signal is no
longer detected.
longer detected.
• A guide displays No Sync.
Signal, and Power Save (for
approx. 5 sec.)
approx. 5 sec.)
• When the condition continues
where the sync signal cannot
be detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
be detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
Recheck the personal computer
power switch status and the
connection status.
power switch status and the
connection status.
When the input signal does not
match the monitor specifications
or is in an unstable status.
match the monitor specifications
or is in an unstable status.
A guide displays Invalid Scan
Freq.
Freq.
Recheck the input signal
specifications.
specifications.
60
62
~
RGB2
RGB
RGB
H : 48.4kHz
V : 60.1 Hz
-- -- Min.
-- -- : -- --
OFF
! No Sync. Signal
! Invalid Scan Freq.
RGB
53