Husqvarna 4210-g User Manual

Page of 56
Periodic Service Schedules
Page 30
2005 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
PERIODIC SERVICE SCHEDULE – ELECTRIC VEHICLES
REGULAR INTERVAL 
SERVICE
Daily service by owner
Batteries 
Charge batteries (after each use only).
Weekly service by owner
Batteries
Check electrolyte level. Add water if 
necessary. See page 35.
Monthly service by owner
or trained technician
Batteries
Wash battery tops and clean terminals 
with baking soda/water solution.
Tires
Check air pressure and adjust if 
necessary. See Vehicle Specifications 
on page 46.
General vehicle
Wash battery compartment and underside 
of vehicle.
Semiannual service by trained 
technician only (or every 50 hours of 
operation, whichever comes first)
Brake system
Check brake shoes; replace if necessary. 
See Section 6 – Wheel Brake 
Assemblies in the appropriate 
maintenance and service manual.
Lubricate brake slides per Lubrication 
Schedule. See Section 6 – Wheel Brake 
Assemblies in the appropriate 
maintenance and service manual.
Check brake cables for damage; replace if 
necessary.
Electrical wiring and connections
Check for tightness and damage.
Forward/Reverse switch
Check condition of contacts and wire 
connections. Make sure connections are 
tight.
Semiannual service by trained 
technician only (or every 50 hours of 
operation, whichever comes first) 
continued
Front wheel alignment and camber
Check and adjust as required. See 
Section 7 – Steering and Front 
Suspension in the appropriate 
maintenance and service manual.
Annual service by trained technician 
only (or every 100 hours of operation, 
whichever comes first)
Motor controller output regulator (MCOR)
Check for loose hardware, cracks and 
other damage.
Batteries
If batteries are not performing as 
expected, see Section 13 – Batteries in 
the appropriate maintenance and service 
supplement.