Hitachi VTMX-231A User Manual

PLAYBACK 

 

27

• You may also select the Auto Repeat mode by pressing the AUTO REPEAT button on the remote control. 
• Once you select the Auto Repeat mode, it stays in effect even after you turn off the VCR. 
• The Counter Memory button does not function if the Auto Repeat mode is set to [ON].  In this case, set the Auto Repeat 
mode to [OFF]. 
• To stop playback, press STOP button. 

• Repeat steps [1] to [2] and press the F.FWD/

 button. [ON] will then disappear from the menu.  Then press RESET/EXIT 

button to return to TV mode. 
• Or, press the AUTO REPEAT button again. 

Power failure: If there is a power failure for more than 30 seconds, Auto Repeat Playback will go to off. 

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 
• Selecting ON or OFF must be done during playback. 

1 Insert rental tape into VCR 
Begin playback. 

2 Select "VCR SET UP" 
Press MENU button repeatedly so that the VCR SET UP menu appears. 

3 Select "RENTAL" 

Press 

/PLAY or 

/STOP button repeatedly to point to "RENTAL". 

 
 

        VCR SET UP 

 
 AUTO 

PLAY 

       

→ 

RENTAL 

 AUTO 

RETURN 

 
 
 
 
 

4 Select "RENTAL" to [ON] 

Press F.FWD/

 button so that "RENTAL ON" appears. 

• You may also set the Rental mode to ON or OFF by pressing the RENTAL SELECTOR button on the remote control 
during playback. 
• Once you select the Rental mode, it stays in effect even after you turn off the VCR. 
• To stop playback, press STOP button. 

• Repeat steps [1] to [3]. Then, press F.FWD/

 button so that "RENTAL OFF" 

appears.  
• Or, press the RENTAL SELECTOR button during playback so that "RENTAL OFF" appears on the TV screen. 

Power failure: If there is a power failure for more than 30 seconds, Rental Playback will go to off.