Garmin rino 520 User Manual

U

NIT

 O

PERATION

 > 

R

ADIO

 P

AGE

Call Tone—When the Call button 

is pressed, an attention tone is 

transmitted. This option allows you 

to choose one of 10 tones.
Roger Tone—When the Talk 

button is released, a tone is sent to 

signify the end of the transmission. This option allows 

you to choose one of four tones, or set the tone to Off.
Ring Tone—When an incoming transmission is received, 

an attention tone will sound. This option allows you to 

choose one of 10 tones or set the tone to Off. The Ring 

tone will not sound again until there has been 45 seconds 

of radio inactivity.
Vibrate—Choose from On or Off to have the unit 

vibrate when an incoming transmission is received. Once 

received, the unit will not vibrate again until there has 

been 45 seconds of radio inactivity. The unit also vibrates 

at Power On when set to do so.

Message Beep—Choose from 19 options or Off to have 

the unit emit a tone when a message or note is received.
Key Beep—Choose from four tones or Off to emit a tone 

when a key is pressed.
Power Beep—Enable or disable the tone the unit makes 

when it is turned on and off. 
Turn Warning (Early)—Choose from 19 tones or Off to 

signal an upcoming turn on a route.
Turn Warning (Final)—Choose from 19 tones or Off to 

signal the final turn on a route.
A “Set Quiet Mode” is available to mute all tones using 

the Option Menu.
Setup Scanlist

Refer to “Scanning and 

Monitoring” for complete 

information about this feature 

and the options in  

this page.

Setup Tones Page

Setup Scanlist Page