Garmin rino 520 User Manual

Available for the Rino 530 only, this feature allows you 

visually locate an object and navigate to it.
To use Sight ‘N Go to navigate:

1.  Use the 

Page button to access the Compass 

Page and then use the 

Thumb Stick to access 

the 

2.  Use the 

Thumb Stick to highlight Sight ‘N Go 

and press In. Note that the compass ring with 

pointer is in-line with the two sighting marks on  

the case. 

3.  Hold the Rino 530 at eye level and line up the two 

sighting marks on the case with a distant object. 

Press the 

Thumb Stick In to Lock Direction.

4.  To navigate to your destination, select 

Set Course 

and press the 

Thumb Stick In. Begin traveling to 

your destination using the pointer as a guide.

  To view your destination as a waypoint, select 

Project Waypoint and press the Thumb Stick In. 

To re-sight the destination, press the 

Thumb Stick 

In when 

Re-Sight is highlighted.

When you first use the Rino 530, the Electronic Compass 

must be calibrated outdoors and away from metal 

objects. The accuracy of the Electronic Compass is 

adversely affected if the unit is not held level or is held 

near items that generate magnetic fields, such as cars, 

large belt buckles, etc. Recalibration is recommended 

after significant environmental changes such as location 

changes, temperature fluctuations, switching from 

lithium-ion battery power to alkaline or NiCad. etc.

Rino 530 held level 

for Sight ‘N Go

Sighting Marks

U

NIT

 O

PERATION

 > 

C

OMPASS

 P

AGE