Olympus SZ-10 User Manual

Page of 84
13
EN
Preparing the Camera
Preparing the Camera
Inserting the battery
1
2
  Insert the battery as illustrated with the C mark 
toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may 
produce heat or an explosion.
  Insert the battery while sliding the battery lock knob in 
the direction of the arrow.
  Slide the battery lock knob in the direction of the 
arrow to unlock, and then remove the battery.
2
1
Battery/card compartment lock
Battery/card 
compartment cover
2
1
Battery/card compartment lock
Battery/card 
compartment cover
Battery lock knob
Battery lock knob
  Turn off the camera before opening the battery/card 
compartment cover.
  When using the camera, be sure to close the battery/
card compartment cover.
3
Charging the battery and setting up 
using the supplied CD
Connect the camera to the computer to charge the battery 
and use the supplied CD for setup.
  User registration using the supplied CD and 
installation of [ib] computer software is available on 
Windows computers only.
The camera battery can be charged while the camera is 
connected to a computer.
The indicator lamp lights during charging and turns 
off when charging is complete.
  Charging takes up to 3.5 hours.
  If the indicator lamp does not light, the camera is not 
correctly connected or the battery, camera, computer, 
or USB cable may not be functioning as expected.
  We recommend that you use a computer equipped 
with Windows XP (Service Pack 2 or later), Windows 
Vista, or Windows 7. See “Charging the battery with 
the included USB-AC adapter” (p. 16) if you are using 
a different computer or wish to charge the battery 
without using a computer.
2
1
2
1