ICOM IC F110S

5

1

PANEL DESCRIPTION

¡

¡ EMERGENCY KEY

Push and hold the key to transmit an emergency call.
• If you want to cancel the emergency call, push

and hold (or push) the key again before trans-
mitting the call.

• Depending on the pre-setting, the emergency

call is transmitted one time only, or repeatedly,
until receiving a control code.

¡

¡ Hook Scan

Several functions are available for the hanger
function when taking the microphone from its
hanger (hanger-off) and/or returning it to the
hanger (hanger-on).

¡

¡ USER SET MODE KEY

Changes the contents of the items in the User Set
mode. Please refer to p. 8.
• Push and hold this key for 1 sec. to enter set

mode. Push this key again momentarily to select
the desired item. Push [P2] and [P3] to set the
desired level/condition.
Push and hold this key again to exit set mode.

• User set mode also available via the ‘Power ON

function’.

¡

¡ SCRAMBLER KEY

• Push and hold to turn the voice scrambler func-

tion ON.

• Push this key to turn the voice scrambler func-

tion OFF.

NOTE:
• The optional UT-109 (#02) or UT-110 (#02)

VOICE SCRAMBLER UNIT is required.

– UT-109: Non-rolling type. 32 codes are available.

– UT-110: Rolling type. Provides higher communi-

cation security. 1020 (4 groups 

× 255) codes are

available.

• This transceiver requires version #02 of

these units. Do not install version #01, as
they are not compatible.

• Some PC board modifications are required

when installing UT-109 and UT-110. Please
refer to ‘Optional UT-109/UT-110 installation’.
(p.12)

• Please contact your Dealer for details.

IC-F110_210S_GEN-1.qxd  05.9.16 9:46 AM  Page 5 (1,1)