Hitachi VT-F390A User Manual

 

 

 

 

 

      

 

Remote Control Illustration 

POWER  Turns the VCR on and off 

GUIDE  Brings up an on-screen setup and programming guide, the Easy 
Guide System. 

DISPLAY  Used in on-screen programming and indexing. 

CLEAR  Used in on-screen programming and indexing. 

VCR/TV  Switches between viewing through the VCR and not viewing 
through the VCR. 

VOLUME  Increase or decrease the audio volume. 

MUTE  Turns off the audio until you press MUTE again. 

REW  Rewinds the videotape. 

PLAY  Starts playing a loaded videocassette. 

REC  Starts recording on the station the VCR is set to. 

VCR, TV, CATV (MODE SELECT)  Device buttons let you set the remote to 
control one of the three devices. 

0 to 9  Number buttons used in on-screen programming.  Can also be used 
to change channels.  (Simply press 2 or 3 digits for the channel you want - 
such as 0 and 6 for channel 6, or 100/ENT and 2 and 4 for channel 124.) 

AVX  Used for recording from an auxiliary input such as a stereo system. 

CHANNEL  Top button switches to next higher channel, bottom button 
switches to the next lower channel.  For these to operate, you must have 
preset your channels. 

PAUSE  Temporarily stops the cassette from recording or playing.  Press 
PAUSE again (or PLAY) to resume. 

F.FWD  Fast forwards the videotape.