Hitachi 13VR10B User Manual

TIMER 

 

48

Press POWER button to set automatic timer recording. 
The REC indicator lights up. 
• You must turn off the TV/VCR to activate automatic timer recording. 
If power is not turned off and you continue watching TV, "TIMER REC 
STANDBY" starts flashing on the TV screen 2 minutes before the 
programmed start time. 

• While setting a program; press ADD/DELETE button to go back one step, 
and enter correct numbers using CH 

 or 

 button. 

• After setting a program; 
1) Press POWER button. 
2) Repeat steps [1] - [2]. 
3) Press SELECT button repeatedly (or press ADD/DELETE button to go 
back one step) until a digit you want to correct flashes, then make changes 
4) Repeat steps [10] and [11]. 

• While setting or after setting a program; 
1) Press POWER button. 
2) Repeat steps [1] ~ [2] and select a program number you want to cancel. 
3) Press ADD/DELETE button. 
4) Press MENU button to return to the TV mode. 
• While recording is in progress; 
1) Press POWER button. 
2) Press STOP/EJECT button on the TV/VCR. 
If you press POWER button to turn off before the end time, timer recording 
will continued. Repeat steps [1] ~ [2], select a program number you want to 
cancel and press ADD/DELETE button. Press MENU button to return to the 
TV mode. 

You will notice that some stations have guide and local channel numbers that 
are the same, and other stations have channel numbers that do not match. In 
case where the channel number DO NOT match, it is necessary for you to 
memorize user channels to guide channels according to the steps below. 

NOTE: You must use the remote control for this procedure. 

Make sure... 
• Power must be turned on to set user channels. 
• Preset the tuner. 

1 Select "CHANNEL SET UP" 

 

Press MENU button repeatedly to point to "CHANNEL SET UP". 
Press SELECT button. 

2 Select "GUIDE CH"