Oricom mi40 User Manual

Page of 36
29 of 72 
Caller ID 
 
If you subscribe (charges may apply) to your telephone service 
providers Caller ID service, numbers of the incoming calls will be 
displayed on the display and stored in the call log. (Please consult 
your telephone service provider for details about this service) 
 
When an external call comes in, the display will show either: 
 
• 
The name of the phonebook entry if the number of the incoming 
number is the same as the number of the phonebook entry, or 
• 
The first 10 characters of the name of the phone book entry, or 
• 
The last 16 digits of the number of the phone book entry if the 
name is unavailable, or  
• 
NOT AVAIL for Out of Area calls and PRIVATE for Private calls 
 
The   icon will be displayed if the number of the CID is displayed and 
has more than 16 digits. 
 
When you have new/unanswered calls, the 
 icon on all the 
handsets that currently connected to the same base unit will be 
turned on. 
 
 
Call Waiting Caller ID 
 
If you have subscribed to your telephone network operators Call 
Waiting Caller ID service, your phone will display the number of the 
other incoming call for around 7 seconds while you are talking on the 
phone.  
 
• 
While the handset is on an external call, a series of short beeps is 
heard. 
• 
Press  
 then 
will place the first external call on hold and 
answer the 2
nd
 call. 
• 
Press 
 then 
 to toggle between two calls. 
 
(Please consult your telephone service provider for details about the 
service). 
 
30 of 72 
 
Call Log 
 
The call log stores the last 20 unanswered and answered incoming 
calls, up to 10 characters for names or prompt messages, 18 digits for 
numbers, date and time.  
 
If a number has been identified several times, it will be stored each 
time the phone rings. Once the 20 numbers are stored the next 
incoming unanswered or answered call will replace the first stored 
number. 
 
Once the call log has been reviewed, the 
 icon on the display of 
that handset will turn off. 
 
Note: The call log is stored on the handset. Deletion of call records on 
one handset is not applicable to all other handsets registered to 
the same base unit. 
 
 
Reviewing the Call Log 
 
• 
Press 
 during predial or standby. 
• 
The most recent received CID is displayed.  
• 
If the call log is empty, EMPTY will be displayed for 2 seconds 
and returned to standby. 
• 
Press 
 to view the next available information. For example, 
pressing 
 on the name will bring out the first 16 digits of the 
number with the   icon turned on. Press 
 again to view the 
remaining digits and the   icon is on. Press 
 again to display 
Date / Time and pressing 
 at Date / Time will display the name 
and so on. 
• 
Use 
 to scroll through the call log. 
• 
To exit, press