Manualsbrain.com
  1. Manuals
  2. Brands
  3. Oricom
  4. mi40
  5. User Manual

Oricom mi40 User Manual

Download
Page of 36
59 of 72 
 
Out of Range Warning 
 
When the handset is too far away from the base during standby and 
the link is lost with the base, the display will show BS SEARCH and 
the   icon will blink. 
• 
Bring the handset nearer to the base so that the signal gets 
stronger. 
• 
When the signal between the handset and base re-establishes, 
the display will go to standby and the   icon will be steady. 
 
When the handset is too far away from the base during a call, user 
will hear an alert tone through the earpiece.   
• 
Bring the handset closer to the base so that the signal gets 
stronger.  
• 
If you fail to bring the handset back in range with the base, 
your call would be disconnected. 
 
 
Auto Answering 
 
When the function is activated, user is able to answer a call by lifting 
the handset out of the base cradle without having to press the 
 
key.  
 
• 
Press
. Use 
 to scroll through the menu until the display 
reads SETTINGS. 
• 
Press
. Use 
 to scroll through the menu until the display 
reads AUTO ANS. 
• 
Press
.  
• 
To activate:  
o 
Use 
 to select ON. 
o 
Press
. User can answer a call by lifting the handset out of 
the base cradle without having to press the 
 key. 
• 
To de-activate: 
60 of 72 
o 
Use 
 to select OFF. 
o 
Press
. User will need to press the 
 key to answer a 
call no matter the handset is on the base cradle or out of the 
base cradle.  
 
 
Recall Timing 
 
Recall timing default settings are: Australia 100ms and New Zealand 
600ms. You should not need to change these settings. 
If when you are using network services or a PBX the  
   button 
does not work you can select a different setting. 
 
• 
Press
. Use 
 to scroll through the menu until the display 
reads SETTINGS. 
• 
Press
. Use 
 to scroll through the menu until the display 
reads FLASH TIME. 
• 
Press
. Use 
 to select from the two durations choose Flash 
1 for Australia and Flash 2 for New Zealand. 
• 
Press 
 on a selection to confirm and exit to FLASH TIME. 
• 
Press and hold 
 will exit to standby. 
 
 
Handset Name 
 
If you choose to you may programme each handset with its own 
name to be displayed during standby. 
 
• 
Press
. Use 
 to scroll through the menu until the display 
reads DISPLAY. 
• 
Press
. Use 
 to scroll through the menu until the display 
reads LABEL.