ICOM ic-q7 User Manual

22

8

■

When using a repeater, the transmit frequency is shifted from
the receive frequency by the offset frequency. (p. 24) It is con-
venient to program repeater information into memory chan-
nels. (p. 12)

q

Set the receive frequency (repeater output frequency).

w

Set the shift direction of the transmit frequency. (–DUP or
DUP; see the next section for details.)

• When the auto repeater function is in use (U.S.A. version only),

this selection and step 

e

are not necessary. (p. 25)

e

Activate the subaudible tone encoder, according to re-
peater requirements.

• Refer to the next page for tone frequency settings.

r

Push and hold [PTT] to transmit.

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

• If “OFF” appears, check the offset frequency (p. 24) or shift di-

rection (right section).

t

Release [PTT] to receive.

y

Push and hold [SQL] to check whether the other station’s
transmit signal can be directly received or not.

D

q

Push [V/M] for 2 sec. to enter expanded set mode.

w

Rotate [DIAL] until “DUP” appears.

• Turn the expanded set mode ON for selection. (p. 28)
• “DUP” disappears after 1 sec. and “dP” appears.

e

While pushing [FUNC], rotate [DIAL] to select “– DUP” or
“+DUP.”

• “–DUP” or “+DUP” indicates the transmit frequency for minus shift

or plus shift, respectively.

• When the auto repeater function is in use (U.S.A. version only),

this selection and step 

e

are not necessary. (p. 25)

r

Push [V/M] to exit set mode.

➲

Tone scan function: When you don’t know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.

➥

Push [FUNC] + [

Y

] or [

Z

] for 2 sec. to activate. See p. 27

for more information.

Plus shift

Minus shift