ONKYO dv-cp704s User Manual

16

Notes:
• If the remote controller doesn’t work reliably, try 

replacing both batteries.

• Don’t mix new and old batteries, or different types of 

batteries.

• If you intend not to use the remote controller for a long 

time, remove the batteries to prevent possible leakage 
and corrosion.

• Flat batteries should be removed as soon as possible to 

prevent possible leakage and corrosion.

To use the remote controller, point it at the DV-CP704’s 
remote control sensor, as shown below.

Notes:
• The remote controller may not work reliably if the 

DV-CP704 is subjected to bright light, such as direct 
sunlight or inverter-type fluorescent lights. Keep this 
in mind when installing the DV-CP704.

• If another remote controller of the same type is used in 

the same room, or the DV-CP704 is installed close to 
equipment that uses infrared rays, the remote control-
ler may not work reliably.

• Don’t put anything, such as a book, on the remote con-

troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.

• The remote controller may not work reliably if the 

DV-CP704 is installed in a rack behind colored glass 
doors. Keep this in mind when installing the 
DV-CP704.

• The remote controller will not work if there’s an obsta-

cle between it and the DV-CP704’s remote control 
sensor.