GE 25860 User Manual

2. Use the CID-VOL (- or +) buttons on the handset or the handset touch-

tone pad to select 1, 2, or 3.

3. Press the flash/prog button again. 

NOTE: Press the *exit button once to keep the previous setting and return to 

the standby screen.

As you become familiar with this system, you may prefer to use the 

system’s original settings. Follow the steps below to return to the factory 

default settings.

1.  Press the flash/prog button until DEFAULT shows in the display. The 

default is NO.

2. Use the CID-VOL (- or +) buttons to select YES or NO. (or press 1 to select 

NO or press 2 to select YES)

3. Press the flash/prog button again. You will hear a confirmation tone.

NOTE : The default settings are “ENGLISH, AREA CODE - - -”, and “RINGER TONE 1”.

NOTE : Press the *exit button once to keep the previous setting and return to 

the standby screen.

1.  Pick up the handset, and press the talk/callback button.
2.  When you hear a dial tone, dial a telephone number.
3.  When finished, press the talk/callback button again to hang up.
 

OR

1.  Dial the phone number first, then press the talk/callback button.
2.  When finished, press the talk/callback button again to hang up.

NOTE: If you make a mistake press the del/chan button to backspace and 

erase the wrong number(s).

1.  Pick up the handset, and press the talk/callback button.

NOTE: The talk/callback button is disabled when the handset is in the cradle.