GE 25860 User Manual

Use this feature to make calls which require a sequence of numbers, for 

example, when you use a calling card to dial a frequently called long 

distance number. Chain dialing lets you dial number sequences from 

memory with a few button presses. The following example shows you how 

to use chain dialing to make a call through a long distance service:

Long distance access number 

7

Authorization code 

8

Frequently called long distance number 

9

1.  Make sure the phone is ON by pressing the talk/callback button on the 

handset.

2. Press the memory button and then press 7.
3. When you hear the access tone, press memory again, and then press 8.
4. At the next access tone, press memory and then 9.

TIP: Wait for the access tones before pressing the memory button, or your call 

might not go through.

Press the # pause button on the handset to insert a delay in the dialing 

sequence of a stored telephone number. A pause is needed to wait for a 

dial tone (for example after you dial 9 for an outside line, or to wait for a 

computer access tone).  Each pause counts as 1 digit in the dialing sequence.

1.  Make sure the phone is OFF (not in TALK mode).
2. Press the memory button on the handset.
3. Use the CID-VOL (- or +) button on the handset to scroll to the desired 

memory location, or use the touch-tone pad to enter the desired memory 

location.

4. If you want to delete the information, press the del/chan button on the 

handset while the entry displays. The display shows DELETE?

5. Press del/chan again to confirm. The display shows DELETED.