OKI fax 5050 User Manual

If  your OKIFAX displays “TONER LOW” or  “REPLACE
TONER CART.,” replace the toner cartridge with a new one
soon. If print density is high enough, you can continue to to
use the toner cartridge without replacing it until print quality
becomes unacceptable. Keep in mind that if you don’t replace
the cartridge soon, there is a risk that a fax will be unreadable
when it prints using an empty cartridge.

If the print density becomes low even before your OKIFAX
displays  “TONER LOW”  or “REPLACE TONER CART.,”
gently wipe the lens surface of the LED array (see Step 8). If
the print density does not improve, replace the toner car-
tridge.

 Be careful when handling the toner cartridge. Do

not let toner spill on your clothing or other porous materi-
als. Use cold water to clean up spilled toner; hot water
causes the stain to set.

Lift the document table into an upright position.

Push in the cover release buttons on the side of the copy
stacker until you hear a click. Lift the copy stacker.

Pull the blue lever on the old toner cartridge all the way
toward you. Carefully pull the old toner cartridge out of the
image drum unit. Dispose of it in the plastic bag you received
with your new cartridge

Remove the new toner cartridge from its package and gently
shake it from side to side to distribute the toner. Then
carefully peel the white plastic tape from the bottom of the
toner cartridge.

Of5050hw.pm6

4/15/98, 9:38 AM

64