ICOM ic-2710h User Manual

1

PANEL DESCRIPTION

6

■ Microphone

TSQLS

Mic element

q

w

e r

t

y

u

i

o

q UP/DOWN SWITCHES [Y]/[Z]

➥ Push either switch to change the operating frequency,

memory channel, set mode contents, etc. (pgs. 17, 32)

➥ Push and hold either switch to start scanning. (p. 42)

w PTT SWITCH

➥ Push and hold to transmit; release to receive. (p. 25)
➥ Toggles between transmitting and receiving while the

one-touch PTT function is in use. (p. 26)

e VFO SWITCH [VFO(LOCK)]

➥ Push to select VFO mode.
➥ Push and hold to toggle the lock function ON and OFF.

r MEMORY SWITCH [MR(CALL)]

➥ Push to select memory mode. (p. 32)
➥ Push and hold to select the call channel. (p. 37)

t ACTIVITY INDICATOR

Lights red while a key is pushed; lights green while the
one-touch PTT function is in use.

y BAND SWITCH

➥ Push to toggle the main band. (p. 15)
➥ Push and hold to turn the sub band access function ON

and OFF. (p. 22)

u FUNCTION SWITCHES [F-1]/[F-2] (p. 74)

Assign your desired key function from the front panel
switches.

• Default settings are VHF and UHF tuning dials to [F-1] and [F-2],

respectively for quick band selection.

i FUNCTION INDICATOR

➥ Lights yellow while [FUNC] is activated—indicates the

secondary function of switches can be accessed.

➥ Lights green when [DTMF-S] is activated—DTMF sig-

nals can be transmitted with the keypad. (p. 51)

o KEYPAD

Used for controlling the transceiver, transmitting a DTMF
encoder, etc. See pgs. 7 and 8 for function details.

IC-2710H.qxd  02.2.8 16:55  Page 6 (1,1)