ICOM ic-2710h User Manual

13

PAGER AND CODE SQUELCH

62

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Set the operating frequency.

Ç

Push [FUNC] then [

➄C SQL] to turn the code

squelch ON.

• “C” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with

the code squelch. (p. 54)

É

Select the desired code channel:

➥ Push [FSET].
➥ Push [Y] or [Z] to select the code channel.
➥ Push [ECLR] to exit the setting display.

Ñ

Operate the transceiver in the normal way
(push [PTT] to transmit; release [PTT] to re-
ceive).

• Prior to voice transmission, a 3-digit transmit code

is sent each time [PTT] is pushed in order to open
the receiving station’s code squelch.

Ö

To cancel the code squelch push [ECLR].

• Pushing [FUNC] then [FD-OFF] also cancels the

code squelch.

■ Code squelch operation

➀

Push the desired band’s tuning dial.

➁

Set the operating frequency.

➂

Push [DTMF] 3 times to turn the code squelch ON.

• “C” appears in place of the 100 MHz digit as shown below.
• An optional tone squelch can be used together with the code

squelch, although the pocket beep cannot be used. (p. 54)

➃

Select the desired code channel:

➥ Push [SET].
➥ Rotate the selected band’s tuning dial to select the code chan-

nel.

➥ Push the selected band’s tuning dial to exit the setting display.

➄

Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).

• Prior to voice transmission, a 3-digit transmit code is sent each

time [PTT] is pushed in order to open the receiving station’s code
squelch.

➅

To cancel the code squelch, push [DTMF] once (or 2 times
for the U.S.A. version).

• The display shows the operating frequency.

“C” appears in place
of the 100 MHz digit.

C SQL

5

CLR

A

IC-2710H.qxd  02.2.8 16:55  Page 62 (1,1)