iRiver h10 5gb Quick Setup Guide

QUICK START GUIDE

a. Plug the included USB/Charging cable into the H10.

b. Plug the included AC adapter into a wall outlet then into

the jack on the USB/Charging cable. The charging indicator

light will illuminate on the cable.

c. The light will dim when charging is complete.

d. iriver strongly recommends that the player be fully charged

or connected to the AC adapter prior to performing the

functions below.

Basic Operation

Charging The Player

1. Software Installation

Insert the installation CD, the software installation will
begin automatically.

Follow on-screen instructions to complete the
software installation.

4. Connect the H10 to a PC

a. Connect the included USB cable to the port on the H10
then to an open USB port on your computer.
b. Power on the player by pressing the button.
c. The LCD screen will display “USB Connected”.
d. Windows may show “Found New Hardware” when the player
is first attached.
e. The H10 will appear as a new device under My Computer

The H10 is now installed and working properly. Please see the reverse side for steps to load music onto the H10.

3. Menu/Navigation

a. Navigation uses a combination of buttons:

a. Touch-pad for scrolling up and down menus

b. button to select items

c. button to return to the previous screen

*At any time, press and hold the button to return
to the main menu screen.

2. Power On/Off

a. Press the button to power on the H10.
b. Press and hold the button to power off
the player.

H10

H10 QUICK START GUIDE

< bottom of player >

charging indicator

< bottom of player >

This guide shows examples from Windows XP only.