GE wwa7650s User Manual

Page of 24
 
 
(continued)
● 
Keep 
 laundry aids (such as
 bleaches, fabric 
 
 of 
 
   
   a locked cabinet.
Observe   warnings   
labels to avoid personal 
● 
Keep 
 area around and underneath
 appliances 
 from 
accumulation   combustible materials,
such as lint, paper, rags, chemicals, 
● 
Keep the 
 around your appliances clean and
dry to 
 
 possibility of slipping.
● 
To minimize 
 
 of electric
shock, unplug this appliance from the
power supply before attempting any
maintenance   cleaning (except 
removal and cleaning of the lint filter).
NOTE: 
 
 Cycle Selector
   an 
 position does NOT
disconnect the appliance from 
power supply,
● 
 not operate this appliance   it is damaged,
malfunctioning, partially disassembled, or has
missing or 
 parts, including a damaged
cord or 
● 
Never 
   or 
 on the washer top,
● 
Do not wash fiberglass articles   your washer.
Skin irritation could 
 from the remaining
particles that may be picked up by clothing
during subsequent washer use.
● 
 laundry process 
 reduce
 
 
 of fabrics.
 
 
 
manufacturer’s care instructions
should be followed 
 carefully.
For 
 
● 
Do not leave washer   up during cycle.
This will stop the wash and spin action and
prevent completion of the cycle.
 
 not 
 
 controls.
 
 
If your clothes and household items don’t look clean
and fresh after washing, you will probably rewash
them.. and that means you’ll waste energy. Remember
to sort your clothes carefully, and load them properly,
select correct cycles, use enough detergent and choose a
water 
temperature warm enough to release and get rid
of soil.
● 
Try to wash less often. Save articles of the same
type of fabric until you have a full load.
● 
If you must wash smaller loads, adjust the amount
of water. Small loads should have lower water
levels.
 Always rinse in cold water. The temperature of the
rinse does not affect cleaning.
● 
Wash in off-peak utility hours. Your local utility can
tell you which are the 
 hours.
● 
Use your washer’s Normal Spin. This will remove
more water during spin, which will shorten drying
cycle to save more energy.
4