Hitachi pwt001 User Manual

Thank you for purchasing the Hitachi Plasma TV Wall-mount Unit.

To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this

manual in a safe place for future reference.

This plasma TV wall-mount unit is for use with the following models:

Special techniques are necessary for installation of the plasma TV.

■ Do not attempt to perform this work by yourself.
■ Request an installation specialist to install this unit.
■ This company assumes absolutely no responsibility for injuries and damages that may occur due to

improper installation and handling.

■ Please remember that if you remove the plasma TV set from the wall later, you will find the screw holes and

anchor bolts for the mounting unit left on the wall. Also note that a long use of the plasma TV set may

discolor the wall around it due to its heat and air flow.

●

 To ensure customer safety, be sure to design the installation location so that the strength is sufficient to

withstand the weight of both the plasma TV and the wall-mount unit.

●

 Always use at least two persons for all installations.

●

 Fully tighten all of the mounting screws as specified in the installation instructions.

Wall-mount metal
(top) 

x 

1

M6 

x 

18 screw

x 

10

M5 - 6 flat washer

x 

8

Wire clamp 

x 

2

TV-mount metal

x 

2

Wall-mount metal
(center) 

x 

1

Wall-mount metal
(bottom) 

x 

1

Bracket (R),(L) 

x 

1 each

M6 

x 

18 screw

x 

4