GE dect 0007634 User Manual

Three-Way calling

Between two handsets or a handset and base and an external call

1. During an external call, press the

int button on the handset or base and the external

call is placed on hold. The list of handsets or base show in the display.

. Use the 5 or 6 button to select desired handset or base. A tone sounds and

PAGING

shows in the originating handset or base display.

NOTE: PAGING FROM… shows in the display on the receiving handset or

base, and the receiving handset or base must press the int button or the

OK (SKL) to answer the intercom.

3. When the receiving handset or base connects, press the

UNHOLD (SKR) on the

originating handset or base to conference with the receiving handset or base and the

external caller.

CONFERENCE shows in the display on the originating and receiving

handsets.

NOTE: A handset or base can enter conference mode directly by

pressing the

LINE 1 or LINE 2

button on the second handset or base

during a call.

Between a handset or base and external calls on the Line 1 and Line 2

1. During an external call on either LINE 1 or LINE , press the

HOLD (SKR) to put the call

on hold.

. If the originating line is LINE 1, press the

LINE 2 button. LINE 1 icon flashes and LINE 2

icon shows in the display steadily.

3. Press the

CONF button to conference with the external call.

Transferring External Call to Other Handsets or Base

During an external call, you may transfer the external call to another handset or base.

1. Press the

int button on the originating handset or base to put an external call on hold,

and then page the receiving handset or base.

. The list of handsets or base shows in the display. Use the 5 or 6 button to select

desired handset or base.

3. Press the

SELECT (SKL) to start the page. You will hear a paging tone. PAGING shows

on the originating handset’s display or base display, and

PAGING FROM…. shows on

the receiving handset’s display or base display.

4. When the receiving handset connects, press the

END/CANCEL button on the

originating handset or base to transfer the call.

- OR -

Press the

END/CANCEL button on the originating handset or base to transfer the call.