ICOM ic-r2 User Manual

■

q

Select VFO mode with [V/M].

w

Select the desired band with [BAND].

e

Rotate [DIAL] to change the frequency.

• The frequency changes according to the preset tuning steps. See

the right section for selecting the tuning step.

• Rotate [DIAL] while pushing [FUNC] to change the frequency in 1

MHz steps (default; p. 26).

The 1 MHz tuning step (dial select step) can be set to 100

kHz, 1 MHz or 10 MHz tuning steps in set mode. See p. 26
for details.

■

Tuning steps can be selected for each band, however, the tun-
ing step of the broadcast band is fixed to 9 kHz steps except
for U.S.A. and Canada versions. The following are available.
• 5 kHz

• 6.25 kHz • 10 kHz

• 12.5 kHz • 15 kHz

• 20 kHz

• 25 kHz

• 30 kHz

• 50 kHz

• 100 kHz

D

q

Select VFO mode with [V/M].

w

Select the desired band with
[BAND].

e

Push [TS] to enter tuning step set-
ting condition.

r

Rotate [DIAL] to select the desired tuning step.

t

Push [TS] to return to normal operation.

D

q

Select VFO mode with [V/M].

w

Select the desired band with [BAND].

e

Push [V/M] for 2 sec. to enter set mode.

r

Rotate [DIAL] until “STEP” appears.

• “STEP” disappears after 1 sec. and the previously selected tun-

ing step and “tS” appear.

t

While pushing [FUNC], rotate [DIAL] to select the desired
tuning step.

y

Push [V/M] to exit set mode.

7

3

FREQUENCY AND CHANNEL SETTING

15 kHz tuning step

[DIAL] changes the frequency according 
to the selected tuning step.

While pushing [FUNC], [DIAL] changes
the frequency in 1 MHz steps (default).