ICOM ic-r2 User Manual

12

5

■

The receiver has 400 memory channels in 8 banks for stor-
age of often-used frequencies.

D

The following information can be programmed into memory
channels:

• Operating frequency (p. 7)
• Receive mode (p. 11)
• Tuning step (p. 7)
• Duplex direction (DUP or – DUP) with an offset frequency

(p. 24)

• Tone squelch ON/OFF (p. 22)
• Tone squelch frequency (p. 22)
• Scan skip setting (p. 18)

■

q

Select VFO mode with [V/M].

w

Set the desired frequency:

➥

Select the desired band with [BAND].

➥

Set the frequency using [DIAL].

➥

Set other data (e.g. offset frequency, duplex direction,
tone squelch frequency, etc.), if required.

e

Push [FUNC] + [

(V/M)

MW] momentarily to indicate memory

channels.

• Do not hold [FUNC] + [

(V/M)

MW] for more than 0.5 sec., other-

wise the previously selected memory channel will be overwritten.

r

Rotate [DIAL] to select the desired channel.

• VFO (VF), as well as regular memory channels, can be pro-

grammed in this way.

• Rotate [DIAL] while pushing [FUNC] to select a memory bank,

programmed scan edge channel or VFO.

t

Push [FUNC] + [

(V/M)

MW] for 1 sec. to program.

• Keep pushing for 2 sec. or more to automatically select the next

memory channel, if desired.

momentarily

blank channel

for 2 sec.

+

+

for bank
selection

for CH
selection

+

[EXAMPLE]: Programming ch 40 of memory bank 5 during selection.