ICOM ic-r2 User Manual

21

7

PRIORITY WATCH

■

D

q

Select VFO mode; then, set an operating frequency.

w

Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [FUNC] + [

Y

] or [

Z

] mo-

mentarily to start memory scan.

e

Push [V/M] for 2 sec. to enter set mode.

r

Rotate [DIAL] until “PRIO” appears.

• “PRIO” disappears after 1 sec. and “OFF” and “PR” appear.

t

While pushing [FUNC], rotate [DIAL] to select priority
watch ON or priority watch ON with alert.

y

Push [V/M] to exit set mode and start the watch.

• The receiver checks the memory channel frequency every 5 sec.
• The watch resumes according to the selected scan resume con-

dition. (p. 18)

u

Push [V/M] while the display
shows the VFO frequency to stop
the watch.

D

q

Select the desired memory channel to be watched.

w

Push [V/M] to select VFO mode.

e

Push [FUNC] + [

Y

] or [

Z

] momentarily to start full scan,

band scan or programmed scan. (p. 16)

r

Push [V/M] for 2 sec. to enter set mode.

t

Rotate [DIAL] until “PRIO” appears.

• “PRIO” disappears after 1 sec. and

“OFF” and “PR” appear.

y

While pushing [FUNC], rotate
[DIAL] to select priority watch ON
or priority watch ON with alert.

u

Push [V/M] to exit set mode and
start the watch.

• The receiver checks the memory

channel frequency every 5 sec.

• The watch resumes according to the

selected scan resume condition. (p.
18)

i

Push [V/M] while the display
shows the VFO frequency to stop
the watch.

Priority watch is ON.

Priority watch set mode

Priority watch with
alert is ON.

While pausing on the
memory channel, “PRIO”
flashes.