Minicom Advanced Systems 116 IP User Manual
SMART 116 IP
37
26.1 Navigating the OSD
To navigate up and down use the Up and Down arrow keys.
To jump from one column to the next (when relevant) use the Tab key.
To exit the OSD or return to a previous window within the OSD press Esc.
26.2 Selecting a computer
To select a computer:
1. Navigate to the desired computer line.
Or, type the port number of the desired computer.
2. Press Enter. The selected computer is accessed. A Confirmation label appears
showing which computer is accessed.
Note! When the OSD is displayed you cannot select computers using the keyboard
hotkeys.
hotkeys.
26.3 The OSD settings - F2
Press F2. The OSD Settings window appears see Figure 36.
Figure 36 Settings window
Note! When the OSD is password protected (explained below) only the
Administrator has access to the F2 settings window.
Administrator has access to the F2 settings window.
26.3.1 The General settings
With the red line on the word GENERAL, press Enter. The General settings
window appears see Figure 37.
window appears see Figure 37.