honda-power-equipment eu3000is User Manual

Page of 71
21
AC OPERATION
OVERLOAD
INDICATOR
LIGHT (RED)
OUTPUT
INDICATOR
LIGHT (GREEN)
PLUG
Plug in the appliance.
Most motorized appliances require more than their rated wattage for
startup.
Determine if the cause is a short circuit in a connected appliance, an
overload, or an overheated inverter. Correct the problem and restart
the generator.
Before connecting an appliance to the generator, make sure that it is in
good order and that its electrical rating does not exceed that of the
generator. Then start the generator and connect the appliance power
cord.
Start the engine and make sure the output indicator light (green)
comes on (see page
If the generator is overloaded (see page
), or if there is a short circuit
in a connected appliance, or if the inverter is overheated, the overload
indicator light (red) will come ON. The overload indicator light (red)
will stay ON, and after about five seconds, current to the connected
appliance(s) will shut off, and the output indicator light (green) will go
OFF. Stop the engine and investigate the problem.
1.
2.
07/01/11 13:53:31 31ZT7600_022