Opticon CRD972X User Manual

D.  Cleaning instructions
Clean the reading window periodically with a soft 
dry cloth.
Clean the exterior by wiping it with a soft, dry cloth. 
Do not use thinner, white spirit or other solvents. 
These can discolour the case and the keys and has 
a negative effect on the lifetime of the keys.
Clean the electrical contacts of the bar code data 
collector and the cradle with a soft dry cloth, or 
cotton bud.
Avoid touching the contacts The contacts must stay 
as clean as possible to maintain optimal charging 
capacity.
Do not use water when cleaning the cradle. This 
can cause malfunction.

E.  Maintenance
There are no user-serviceable parts inside the bar 
code data collector or the cradle. So do not try to 
take it apart. The manufacturer will not be liable for 
any damage caused by the customer. In case of 
serious malfunction, please consult your supplier.

Fix hand strap to bar code data collector.
Use the hand strap properly to avoid drop.
Read instructions in this manual.

Insert battery.
To be sure of proper operation, it is advised to start 
with a fully charged battery. First charge the bar 
code data collector for 8 hours.
Read instructions in this manual.

Place the cradle in normal office conditions.
Avoid a place under strong light. Otherwise infra 
red communication may be disturbed.
Read instructions in this manual.

Use properly.
Take notice that the CRD972X cradle is designed 
for the OPL972X bar code data collector.