Hanna Instruments hi 9110 User Manual

w w w . h a n n a i n s t . c o m

This Instrument is in Compliance

with the CE Directives

Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument. This manual will
provide you with all the necessary informa-
tion for the correct use of the instrument.
This instrument is in compliance with the 
directives.

All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended pur-
pose and maintained according to instructions. The
probes are warranted for a period of six
months.

This warranty is limited to repair or replacement
free of charge.  Damage due to accidents, misuse,
tampering or lack of prescribed maintenance are
not covered.

If service is required, contact the dealer from whom
you purchased the instrument. If under warranty,
report the model number, date of purchase, serial
number and the nature of the problem. If the repair
is not covered by the warranty, you will be notified
of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Re-
turned Goods Authorization Number from the Cus-
tomer Service department and then send it with
shipment costs prepaid. When shipping any instru-
ment, make sure it is properly packaged for com-
plete protection.

Remove the instrument from the packing ma-
terial and examine it carefully to make sure
that no damage has occurred during ship-
ment. If noticeable damage is evident, notify
your dealer.

Note: Save all packing material until you

are sure that the instrument functions
correctly. All defective items must be
returned in the original packing to-
gether with the supplied accessories.

HI 9110 is a portable, waterproof pH meter
with a special pH electrode (HI 1048B),
which has been designed for application in
must and wine analysis.
This meter provides simple manual tem-
perature compensation and pH calibration
over two points (pH3 and pH7).
The calibration trimmers are sealed behind
a protective cover, so that they cannot be
accidentally moved.

The meter is supplied with:
• HI

1048B PTFE junction sleeve, glass-body

pH electrode with BNC connector and 1 m
(3.3') cable

•  ChecktempC  Thermometer
•  HI 50003 pH 3.00 buffer, 20 mL sachet
•  HI 70007 pH 7.01 buffer, 20 mL sachet
•  HI 700635 Cleaning solution for incrusted

wine deposits, 20 mL sachet (2 pcs.)

• HI 700636 Cleaning solution for wine stains,

20 mL sachet (2 pcs.)

• 4x1.5V AA alkaline batteries
• calibration screwdriver & instruction manual
• plastic carrying case.

1. Battery cover
2. BNC plug
3. pH7 Calibration trimmer
4. pH3 Calibration trimmer
5. Temperature setting trimmer
6. Mode indicator
7. Liquid Crystal Display
8. "ON/OFF" key, to turn the meter ON and

OFF

9. "pH/°C SET" key, to select pH measure-

ment or manual temperature setting mode

    

ISTR9110   06/03

0.00 to 14.00 pH

0.01 pH

±0.02 pH

±0.05 pH

Manual, through trimmer,

from 0 to 100°C

Manual, 2-point,

through pH3 and pH7 trimmers

HI 1048B pH-electrode

with BNC connector

4 x 1.5V AA / IEC LR6

2000 hours of continuous use

0 to 50°C (32 to 122°F);

RH 100%

196 x 80 x 60 mm (7.7 x 3.1 x 2.4”)

320 g (11.3 oz.)

Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.