Huawei E960 User Manual

Page of 2
 
 
 
 
HUAWEI E960 HSDPA Wireless Gateway Quick Start 
The HUAWEI E960 supports HSDPA/WCDMA 2100, GSM/GPRS/EDGE 1900/1800/900/850, 
and network auto-switch. With the E960, you can experience wireless gateway and USB modem 
at any time and any place. 
E960 Appearance 
Mode
Reset
Power
Interface
Ethernet
Phone
Power
WLAN
Signal
ON/OFF
 
Power Interface: When connected with the power adapter, the E960 functions as a wireless 
gateway. When connected to the PC with a USB data cable, the E960 functions as a USB 
modem. 
Ethernet: Insert a Ethernet cable connected to the PC or other network equipments. 
Phone: Insert a phone cable connected with a telephone to realize the voice service. 
Power: Power indicator. When it is in yellow, the charge is finished. 
WLAN: WLAN indicator. If it is steady on and in yellow, the WLAN is enabled. If it is 
blinking, data is transmitting. 
ON/ OFF: Press and hold 
  to power on or off the E960. 
Signal: Signal strength indicator. The following table shows the status of the signal strength 
indicator:  
Status 
Description 
Status 
Description 
Fast blinking in 
red 
No SIM card or unverified 
PIN code 
Steady on in 
yellow 
Signal strength in level 
two or three (middle) 
Steady on in red 
Signal strength in level 
one (weak) 
Steady on in 
green 
Signal strength in level 
four or five (strong) 
Mode: The network mode indicator. The following table shows the status of the network mode 
indicator: 
Status 
Description 
Status 
Description 
Step 5: Log in to the Wireless Gateway Web Management 
1. 
Open the Internet Explorer, and then enter the default web address (192.168.1.1) of the E960 
in the address bar. 
Double blinkin
in green 
GE 
Searching the network or 
no network 
Blinking in 
blue 
Normal GPRS/ED
network 
2. 
In the WIRELESS GATEWAY LOGIN page, select the user typeenter the password, and 
then click
Steady on and 
in green 
GPRS/EDGE data service 
connected 
Fast blinking 
in green 
Downloading the 
upgrade mode 
. 
2
Admin: Have the rights the view and modify 
the configurations, and the default password 
is admin;  
Blinking in blue
Normal WCDMA network 
Indicator off 
Off 
Steady on in 
blue 
WCDMA data service 
connected 
Steady on in 
cyan
 
HSDPA data service 
connected 
User: Only view the basic information, and 
the default password is user
3
Reset: Reset
n the side of the E960. Press and hold it for more than five seconds to 
 button. O
restore the factory defaults. 
Only one user can log in to the E960 
management page at one time, which is to 
prevent the configuration conflict.
 
PC Configuration Requirements 
The recommended PC configurations for using the E960 are as follows: 
LCD resolution: 800*600 or above, recommended 1024*768. 
0 or above, Firefox 1.5 or above, Netscape 8.0 or above 
Note: If the configurations of the PC are lower than the recommended, the performance of the 
ed. 
 
CPU: Pentium 500 MHz or above 
4
3. 
If you are prompted to enter the PIN code, you need to enter the correct PIN code, and then 
click 
Memory: 128 MB RAM or above 
Hard disk: 50 MB available space 
Operating System: Windows 2000, Windows XP, or Windows Vista 
 
Note:  
y
If the correct PIN code or PUK code is invalid, you cannot use the network-related 
services. 
 
Interface: standard USB interface 
Internet Explorer: IE6.
Please consult your service provider about whether to use SIM/USIM card. 
Plug in the USB end of the power adapter to the power interface 
of the E960, and plug in the power plug to the power socket. 
Please use the E960 compatible power adapter; otherwise, the 
E960 can be damaged. 
Step 2: Install the 
 
Your service provider provides the SIM/USIM card. For more information about 
SIM/USIM card, please consult your service provider. 
Power Adapter 
E960 may be weaken
 
 
1
 
Step 3: Connect 
The Ethernet cable cannot be longer than 100 meters. For better 
effect, please use the shielded cable. 
Step 1: Insert the SIM Card 
to the PC 
Insert the SIM card into the socket with 
the golden contact facing upward. Insert 
the card socket into the E960. 
 
Step 4: Connect 
The telephone cable cannot be longer than three meters, and the 
telephone can be connected with three extensions. 
 
to the Telephone
Step 6: Making the First Call