Hotpoint wd64 User Manual

The main wash indicator
has been fitted to 
dispense powder 
detergent only.
If you wish to use liquid
detergent, reposition the
main wash indicator as
shown below:

Pull the drawer out until
it reaches its stop.

Press down on button,
to release the drawer
latch and remove the
drawer.

Relocate the drawer and
push back into place.

Lift the main wash 
indicator out of slots,
rotate and reposition for
Liquid, ensuring it is
secure.

1. Drawer latch
2. Button
3. Main wash 

indicator

4. Main wash 

compartment

5. Prewash 

compartment

6. Fabric conditioner

compartment.

To achieve optimum wash
results we recommend that
you use the detergent 
manufacturers dispensing
cup, to dispense no more
than 300ml of powder.

Pour fabric conditioner into
the compartment.
We recommend that you do
not exceed the maximum
level indicated.

It is advisable to clean the dispenser
drawer regularly:
Remove the drawer, see ‘Changing
the Main Wash Indicator’, wash
the dispenser drawer and clean
out the compartment.
Dry thoroughly and relocate.

S OF THE INSTALLATION AND TO THOROUGHLY

F YOUR MACHINE:

E COTTON WASH PROGRAMME (refer to STEP 4)

THOUT ANY LAUNDRY

WITHOUT ANY DETERGENT

✗

Check both hot and
cold water supplies
are running freely...

A cold fill adaptor is 

available from your local

Hotpoint authorised Service

Centre or by

calling the

Genuine

Parts &

Accessories

Hotline 

(see KEY

CONTACTS).

Connect fill hoses to
water supply taps:
- Red or Grey Hose 

end to Hot

- Blue Hose end to 

Cold

TURN ON BOTH TAPS 

ES