ICOM IC-V85 User Manual

36

8

SCAN OPERATION

Scan edges, 1A–3A/1b–3b, must be programmed

in advance. Program them in the same manner as regular
memory channels. (p. 27)

If identical frequencies are programmed into the scan
edges, programmed scan will not proceed.

■

Memory scan repeatedly scans all programmed memory
channels, except those set as skip channels.

q Push 

to select memory mode, if necessary.

• “X” appears.
• See below to select bank scan.

w Push 

and 

(5) to start the scan.

• To change the scan direction, push 

Y

Y

or 

Z

Z

.

• When 

is assigned as tuning dial, rotate 

to change

the scan direction. (pgs. 18, 53)

e Push 

to stop the scan.

—Select the desired bank in step q above.

q Push 

and 

(#) to select memory bank mode.

w Rotate 

to select the desired bank, A to J.

e Push 

✱

(or 

) to select the bank.

Push