Oricom s209 User Manual

Page of 54
 
- 7 - 
Getting Started 
CONNECTING YOUR PHONE 
 
1.  Connect the output plug of the mains adapter to the bottom 
of the base unit. 
 
2.  Connect the mains adapter to a standard wall outlet. 
 
 
3.  Connect the telephone line cords to the phone sockets 
(Line 1 & Line 2) on the side of the base unit and the wall 
phone sockets. 
 
 
SMS is supported on Line 1 only. Connect the SMS-enabled PSTN telephone line cord to Line 1. 
 
4.  Connect the auxiliary device such as a Fax, eftpost 
terminal, phone, or answering system (not supplied) to the 
AUX socket.  
 
The auxiliary corded phone maybe used on Line 1 for  calls 
during power failure situation. 
 
 
CONNECTING YOUR CHARGER 
 
1.  Connect the power adapter of the charger to a powerpoint. 
 
 
CHARGING YOUR HANDSET 
 
 
 
 
 
 
 
 
 
 
 
1.  Place the 2 rechargeable batteries (included) into the 
battery compartment. 
 
2.  Slide the battery door firmly into place. 
 
 
CAUTION:  Check the batteries polarity when inserting the batteries. Incorrect polarity may damage the 
product. 
WARNING:  RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-
rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed 
of in accordance with the applicable waste disposal regulations. 
NOTE:  Charge the handset(s) for 14 hours before initial use!