ICOM ic-a24 User Manual

14

4

MEMORY OPERATION

■ Memory names

ï Programming memory names

The memory channel can display a 6-character names in-
stead of the programmed frequency.

q Rotate [DIAL] to select the desired frequency in the fre-

quency mode.

w Push 

, then push [MR•

MW

] to program the contents

into the selected memory channel.

e Rotate [DIAL] to select the desired memory channel to be

programmed.

• Push 

, then push [0•

BANK

], and rotate [DIAL] to select the

BANK number if desired. Push [CLR•

DEL

] to exit the BANK se-

lection mode.

r Push [MR•

MW

] to enter the memory name programming

mode.

• “-- -- -- -- -- -- ” appears on the display.

t Push the appropriate digit key several times to select the

desired character as listed at right.

• To erase a character, overwrite with a space (displayed as _).
• To move the cursor forwards or backwards, use [DIAL].

y Push [ENT•

WX

] to program the name.

• Flashing the memory name stops.
• When no name is programmed, the display shows the operating

frequency.

• To clear the entered memory names, push [CLR•

DEL

] before

pushing [ENT•

WX

].

NOTE: When programming the memory name to the pro-
grammed memory channel already, operate as follow.
q Operate same as “Transferring memory contents” (see

P. 12).

w Operate same as w–y processes of “Programming

memory names” (see left column).

■ Clearing the memory contents

Unwanted memory channels can be cleared.

q Select the memory channel to be cleared.
w Push

, then push and hold [CLR•

DEL

] for 1 sec.

• “-- -- -- -- -- --” appears momentarily, then the next selectable

channel appears.

1

1, Q, Z

2

2, A, B, C

3

3, D, E, F

4

4, G, H, I

5

5, J, K, L

6

6, M, N, O

7

7, P, R, S

8

8, T, U, V

9

9, W, X, Y

ENT

Program

0

0, space, -