Garmin 74C User Manual

■

Check that the power light is green, not flashing, and the lens cap 
is off. 

■

The projector may be in standby or sleep mode. If the projector 
has not received any input signal for 30 minutes, it turns off the 
lamp to conserve the lamp life and save energy. If the power light 
is orange, press the P 

Power

 button to turn the projector on.

■

Press the 

A/V Mute 

button to make sure the picture has not been 

turned off temporarily. 

■

If the power was switched off and then on again, the projector 
may still be cooling down. Wait until the power light stops 
flashing and remains orange; then press the P 

Power

 button 

again.

■

Check the 

Video Signal

 or 

Input Signal

 setting in the Image 

menu to make sure it is correct for the selected source. See 
page 50 for more information.

■

Has the 

Message

 option in the Setting menu been set to 

OFF

?

■

Adjust the 

Brightness

 setting on the Image menu or select 

High

 

for the 

Brightness Control

 setting in the Advanced menu. See 

page 49 or page 54.

■

The attached computer may be in sleep mode or displaying a 
black screen saver. Try pressing a key on the computer.